. Wind Energy News .




.
WIND DAILY
Offshore use of vertical-axis wind turbines gets closer look
by Staff Writers
Albuquerque NM (SPX) Aug 03, 2012

Large offshore VAWT blades in excess of 300 meters will cost more to produce than blades for onshore wind turbines. But as the machines and their foundations get bigger - closer to the 1000 megawatt (MW) scale - turbines and rotors become a much smaller percentage of the overall system cost for offshore turbines, so other benefits of the VAWT architecture could more than offset the increased rotor cost.

Sandia National Laboratories' wind energy researchers are re-evaluating vertical axis wind turbines (VAWTs) to help solve some of the problems of generating energy from offshore breezes. Though VAWTs have been around since the earliest days of wind energy research at Sandia and elsewhere, VAWT architecture could transform offshore wind technology.

The economics of offshore windpower are different from land-based turbines, due to installation and operational challenges. VAWTs offer three big advantages that could reduce the cost of wind energy: a lower turbine center of gravity; reduced machine complexity; and better scalability to very large sizes.

A lower center of gravity means improved stability afloat and lower gravitational fatigue loads.

Additionally, the drivetrain on a VAWT is at or near the surface, potentially making maintenance easier and less time-consuming. Fewer parts, lower fatigue loads and simpler maintenance all lead to reduced maintenance costs.

Elegant in their simplicity
Sandia is conducting the research under a 2011 Department of Energy (DOE) solicitation for advanced rotor technologies for U.S. offshore windpower generation. The five-year, $4.1 million project began in January of this year.

Wind Energy Technologies manager Dave Minster said Sandia's wind energy program is aimed at addressing the national energy challenge of increasing the use of low-carbon power generation.

"VAWTs are elegant in terms of their mechanical simplicity," said Josh Paquette, one of Sandia's two principal investigators on the project. "They have fewer parts because they don't need a control system to point them toward the blowing wind to generate power."

These characteristics fit the design constraints for offshore wind: the high cost of support structures; the need for simple, reliable designs; and economic scales that demand larger machines than current land-based designs.

Large offshore VAWT blades in excess of 300 meters will cost more to produce than blades for onshore wind turbines.

But as the machines and their foundations get bigger - closer to the 1000 megawatt (MW) scale - turbines and rotors become a much smaller percentage of the overall system cost for offshore turbines, so other benefits of the VAWT architecture could more than offset the increased rotor cost.

Challenges remain
However, challenges remain before VAWTs can be used for large-scale offshore power generation.

Curved VAWT blades are complex, making manufacture difficult. Producing very long VAWT blades demands innovative engineering solutions. Matt Barone, the project's other principal investigator, said partners Iowa State University and TPI Composites will explore new techniques to enable manufacture of geometrically complex VAWT blade shapes at an unprecedented scale, but at acceptable cost.

VAWT blades must also overcome problems with cyclic loading on the drivetrain. Unlike horizontal axis wind turbines (HAWTs), which maintain a steady torque if the wind remains steady, VAWTs have two "pulses" of torque and power for each blade, based on whether the blade is in the upwind or downwind position.

This "torque ripple" results in unsteady loading, which can lead to drivetrain fatigue. The project will evaluate new rotor designs that smooth out the amplitude of these torque oscillations without significantly increasing rotor cost.

Because first-generation VAWT development ended decades ago, updated designs must incorporate decades of research and development already built into current HAWT designs.

Reinvigorating VAWT research means figuring out the models that will help speed up turbine design work.

"Underpinning this research effort will be a tool development effort that will synthesize and enhance existing aerodynamic and structural dynamic codes to create a publicly available aeroelastic design tool for VAWTs," Barone said.

Needed: aerodynamic braking
Another challenge is brakes. Older VAWT designs didn't have an aerodynamic braking system, and relied solely on a mechanical braking system that is more difficult to maintain and less reliable than the aerodynamic brakes used on HAWTs.

HAWTS use pitchable blades, which stop the turbine within one or two rotations without damage to the turbine and are based on multiple redundant, fail-safe designs.

Barone said new VAWT designs will need robust aerodynamic brakes that are reliable and cost-effective, with a secondary mechanical brake much like on modern-day HAWTs. Unlike HAWT brakes, new VAWT brakes won't have actively pitching blades, which have their own reliability and maintenance issues.

VAWT technology: A long history at Sandia
In the 1970s and 1980s, when wind energy research was in its infancy, VAWTs were actively developed as windpower generators. Although strange looking, they had a lot going for them: They were simpler than their horizontal-axis cousins so they tended to be more reliable. For a while, VAWTs held their own against HAWTs. But then wind turbines scaled up.

"HAWTs emerged as the predominant technology for land-based wind over the past 15 years primarily due to advantages in rotor costs at the 1 to 5 megawatt scale," Paquette said.

In the 1980s, research focused more heavily on HAWT turbines, and many VAWT manufacturers left the business, consigning VAWTs to an "also ran" in the wind energy museum.

But the winds of change have blown VAWTs' way once more.

Sandia is mining the richness of its wind energy history. Wind researchers who were among the original wind energy engineers are going through decades of Sandia research and compiling the lessons learned, as well as identifying some of the key unknowns described at the end of VAWT research at Sandia in the 1990s.

The first phase of the program will take place over two years and will involve creating several concept designs, running those designs through modern modeling software and narrowing those design options down to a single, most-workable design.

During this phase, Paquette, Barone and their colleagues will look at all types of aeroelastic rotor designs, including HVAWTs and V-shaped VAWTs. But the early favorite rotor type is the Darrieus design.

In phase two researchers will build the chosen design over three years, eventually testing it against the extreme conditions that a turbine must endure in an offshore environment.

In addition to rotor designs, the project will consider different foundation designs: Early candidates are barge designs, tension-leg platforms and spar buoys.

The project partners will work on many elements.

Another partner, the University of Maine, will develop floating VAWT platform dynamics code and subscale prototype wind/wave basin testing. Iowa State University will develop manufacturing techniques for offshore VAWT blades and subscale wind tunnel testing.

TPI Composites will design a proof-of-concept subscale blade and develop a commercialization plan. TU-Delft will work on aeroelastic design and optimization tool development and modeling. Texas A and M University will work on aeroelastic design tool development.

"Ultimately it's all about the cost of energy. All these decisions need to lead to a design that's efficient and economically viable," said Paquette.

Related Links
DOE/Sandia National Laboratories
Wind Energy News at Wind Daily




.
.
Get Our Free Newsletters Via Email
...
Buy Advertising Editorial Enquiries




.

. Comment on this article via your Facebook, Yahoo, AOL, Hotmail login.

Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle



WIND DAILY
SeaRoc to provide full installation services on Narec's Offshore Anemometry Hub
Brighton, UK (SPX) Jul 20, 2012
International marine engineering company SeaRoc has been appointed to provide the installation of the foundation, equipment platform and meteorological mast at Narec's proposed Blyth Offshore Wind Demonstration Site. Previously awarded to McNulty Offshore Construction Limited, the scope of works will now be undertaken by SeaRoc on behalf of Narec, with vessel confirmation due imminently an ... read more


WIND DAILY
Australia inks UAE nuclear deal

TEPCO chief vows cost cuts amid $3.68 bn loss

TEPCO receives $12.8 billion public bailout

EnBW says won't sue Germany over nuclear exit

WIND DAILY
Japan increasingly turning to solar power

Breakthrough leads to record efficiency for next-gen solar cells

Transparent solar cells for windows that generate electricity

Boeing Subsidiary Spectrolab Names Troy Dawson as President

WIND DAILY
German National Academy of Sciences issues a critical statement on the use of bioenergy

U.S, Australian navies focus on new fuels

Strategies to improve renewable energy feedstocks

Brazil to build first algae-based biofuel plant

WIND DAILY
Offshore use of vertical-axis wind turbines gets closer look

SeaRoc to provide full installation services on Narec's Offshore Anemometry Hub

Italian police seize giant wind farm in mafia probe

GL Garrad Hassan releases update of WindFarmer 5.0

WIND DAILY
China can learn from India's blackouts?

Scottish firth dubbed marine energy park

EDF first-half profits up on hydro, renewables

Hunter-gatherers, Westerners use same amount of energy, contrary to theory

WIND DAILY
Is the Eurozone Doomed? An Interview with Mike Shedlock

Investigations of Shell's Nigeria spills a 'fiasco': Amnesty

Breaking the barriers for low-cost energy storage

Geothermal System Installed at Goddard's Building 25

WIND DAILY
Is the Eurozone Doomed? An Interview with Mike Shedlock

Investigations of Shell's Nigeria spills a 'fiasco': Amnesty

Breaking the barriers for low-cost energy storage

Geothermal System Installed at Goddard's Building 25

WIND DAILY
Toyota recalls 600,000 vehicles in Europe

Pedestrianised Left Bank could spell Paris logjam: report

US auto sales grow but GM, Ford stumble

Honda quarterly profit jumps fourfold to $1.7 bn


Memory Foam Mattress Review

Newsletters :: SpaceDaily Express :: SpaceWar Express :: TerraDaily Express :: Energy Daily
XML Feeds :: Space News :: Earth News :: War News :: Solar Energy News

.

The content herein, unless otherwise known to be public domain, are Copyright 1995-2012 - Space Media Network. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement,agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. Privacy Statement